# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = ..
prefix = /usr
exec_prefix = /usr

bindir = /usr/bin
sbindir = /usr/sbin
libexecdir = /usr/lib
datadir = /usr/share
sysconfdir = /etc
sharedstatedir = /usr/com
localstatedir = /var/lib
libdir = /usr/lib
infodir = /usr/share/info
mandir = /usr/share/man
includedir = /usr/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/fox
pkglibdir = $(libdir)/fox
pkgincludedir = $(includedir)/fox

top_builddir = ..

ACLOCAL = aclocal
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader

INSTALL = /bin/install -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
AS = @AS@
CC = gcc
CPP = gcc -E
CXX = c++
DLLTOOL = @DLLTOOL@
ECHO = echo
EXEEXT = 
FOX_BYTEORDER = 0
FOX_MAJOR_VERSION = 1
FOX_MINOR_VERSION = 0
FOX_PATCH_LEVEL = 26
GL_LIBS = -lGL -lGLU
GL_TESTS = gltest glviewer
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LT_AGE = 0
LT_CURRENT = 0
LT_RELEASE = 1.0
LT_REVISION = 26
MAKEINFO = makeinfo
OBJDUMP = @OBJDUMP@
OBJEXT = o
PACKAGE = fox
RANLIB = ranlib
STRIP = strip
VERSION = 1.0.26
X_BASE_LIBS = -lXext -lX11

htmldir = $(prefix)/fox/html

SUBDIRS = art screenshots

# Human-written HTML files
HTML_FILES =                adie.html               app.html               calc.html               datatarget.html               doc.html               download.html               draganddrop.html               faq.html               filefuncs.html               focus.html               fonts.html               foreword.html               fox.html               goals.html               guiupdate.html               icons.html               introduction.html               layout.html               messages.html               news.html               oldfox.html               pathfinder.html               projects.html               registry.html               rex.html               screenshots.html               serialization.html               styles.css               timers.html               widgets.html               window.html               xml.html               win32.html


# Icons
ICON_FILES =                art/bigpenguin.png               art/foxlogo.png               art/foxstart.png               art/freespeach.gif               art/ill.gif               art/ilr.gif               art/innernerd.gif               art/iul.gif               art/iur.gif               art/nerd_inside.gif               art/oll.gif               art/olr.gif               art/opengl_logo.png               art/oul.gif               art/oul_grey.gif               art/our.gif               art/progress.png               art/scribble.png               art/sgitextedit.png               art/slingerzbutton1.gif               art/win32-libraries.png               art/win32-linkoutput.png               art/win32-postbuild.png               art/win32-preprocessor.png               art/win32-project.png               art/win32-tooloptions.png               art/wintextedit.png               screenshots/adie_colors.jpg               screenshots/adie_del.jpg               screenshots/adie_edit.jpg               screenshots/adie_font.jpg               screenshots/adie.jpg               screenshots/adie_pat.jpg               screenshots/colordialog.png               screenshots/dirdialog.png               screenshots/filedialog.png               screenshots/fontdialog.png               screenshots/foxcalc.jpg               screenshots/foxcalc_prefdialog_01_small.jpg               screenshots/foxcalc_prefdialog_02_small.jpg               screenshots/foxcalc_prefdialog_03_small.jpg               screenshots/pathfinder.png               screenshots/printdialog.png               screenshots/replacedialog.png               screenshots/searchdialog.png


# Complete documentation package
#html_DATA = $(HTML_FILES) $(ICON_FILES)
html_DATA = $(HTML_FILES) 

EXTRA_DIST = $(html_DATA)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES = 
DATA =  $(html_DATA)

DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


install-htmlDATA: $(html_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(htmldir)
	@list='$(html_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(htmldir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(htmldir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(htmldir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(htmldir)/$$p; \
	  fi; fi; \
	done

uninstall-htmlDATA:
	@$(NORMAL_UNINSTALL)
	list='$(html_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(htmldir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = doc

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am: install-htmlDATA
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-htmlDATA
uninstall: uninstall-recursive
all-am: Makefile $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(htmldir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: uninstall-htmlDATA install-htmlDATA install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
