# Makefile.in generated by automake 1.6.1 from Makefile.am.
# docs/html/Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = ../..

prefix = /usr
exec_prefix = /usr

bindir = /usr/bin
sbindir = /usr/sbin
libexecdir = /usr/lib
datadir = /usr/share
sysconfdir = /etc
sharedstatedir = /usr/com
localstatedir = /var/lib
libdir = /usr/lib
infodir = /usr/share/info
mandir = /usr/share/man
includedir = /usr/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/transcode
pkglibdir = $(libdir)/transcode
pkgincludedir = $(includedir)/transcode
top_builddir = ../..

ACLOCAL = ${SHELL} /home/inger/RPM/BUILD/transcode-0.6.2/autotools/missing --run aclocal-1.6
AUTOCONF = ${SHELL} /home/inger/RPM/BUILD/transcode-0.6.2/autotools/missing --run autoconf
AUTOMAKE = ${SHELL} /home/inger/RPM/BUILD/transcode-0.6.2/autotools/missing --run automake-1.6
AUTOHEADER = ${SHELL} /home/inger/RPM/BUILD/transcode-0.6.2/autotools/missing --run autoheader

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /bin/install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
INSTALL_SCRIPT = ${INSTALL}
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = 
host_triplet = i586-alt-linux-gnu

EXEEXT = 
OBJEXT = o
PATH_SEPARATOR = :
A52_CFLAGS = -I/usr/include -I/usr/local/include
A52_LIBS = -L/usr/lib -la52 -lm
AMTAR = ${SHELL} /home/inger/RPM/BUILD/transcode-0.6.2/autotools/missing --run tar
AS = @AS@
AVIFILE_CFLAGS = -I/usr/include
AVIFILE_CONFIG = /usr/bin/avifile-config
AVIFILE_LIBS = -laviplay
AWK = gawk
CC = gcc
CCAS = $(CC)
CCASFLAGS = $(CFLAGS)
CFLAGS = -pipe -Wall -fexpensive-optimizations -march=i586 -mcpu=i686 -O3 -fomit-frame-pointer -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
CPP = gcc -E
CXX = g++
DEPDIR = .deps
DLLDFLAGS = 
DLLTOOL = @DLLTOOL@
DVDREAD_CFLAGS = -I/usr/include -I/usr/local/include
DVDREAD_LIBS = -L/usr/lib -ldvdread -lm
DV_CFLAGS = -I/usr/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/local/include
DV_EXTRA_LIBS = -lglib -ldl -lm
DV_LIBS = -L/usr/lib -ldv -lpthread -ldl  -lglib -ldl -lm
ECHO = echo
GLIB_CFLAGS = -I/usr/include/glib-1.2 -I/usr/lib/glib/include
GLIB_CONFIG = /usr/bin/glib-config
GLIB_LIBS = -lglib
GTK_CFLAGS = -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include
GTK_CONFIG = /usr/bin/gtk-config
GTK_LIBS = -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LAME_3_89 = 
LAME_3_92 = 
LAME_CFLAGS = -I/usr/include -I/usr/local/include
LAME_LIBS = -L/usr/lib -lmp3lame -lm
LDFLAGS = 
LIBFAME_CFLAGS = 
LIBFAME_CONFIG = /usr/bin/libfame-config
LIBFAME_LIBS = -lfame
LIBJPEG_CFLAGS = 
LIBJPEG_LIBS = -ljpeg
LIBMPEG3_CFLAGS = 
LIBMPEG3_LIBS = 
LIBPOSTPROC_CFLAGS = 
LIBPOSTPROC_LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBXML2CONFIG = yes
LIBXML2_CFLAGS = -I/usr/include/libxml2
LIBXML2_LIBS = -lxml2 -lz -lm
LN_S = ln -s
LTLIBOBJS = = .lo
LZO_CFLAGS = -I/usr/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/local/include
LZO_EXTRA_LIBS = -lglib -ldl -lm
LZO_LIBS = -L/usr/lib -llzo -lpthread -ldl  -lglib -ldl -lm
MAGICK_CFLAGS =  -D_REENTRANT -D_FILE_OFFSET_BITS=64 -I/usr/X11R6/include -I/usr/X11R6/include/X11 -I/usr/include/freetype2 -I/usr/include/libxml2
MAGICK_CONFIG = /usr/bin/Magick-config
MAGICK_LIBS =  -L/usr/X11R6/lib   -lMagick -llcms -lfreetype -lXext -lXt -lSM -lICE -lX11 -lz -lpthread -lm
MAINT = #
MJPEGTOOLSCONFIG = yes
MJPEG_CFLAGS = -I/usr/include/mjpegtools
MJPEG_LIBS = -lmjpegutils
MOD_PATH = ${prefix}/lib/transcode
NASM = /usr/bin/nasm
NASMFLAGS = -felf
NET_STREAM = 
OBJDUMP = @OBJDUMP@
OGG_CFLAGS = -I/usr/include -I/usr/local/include
OGG_LIBS = -L/usr/lib -logg -lm
OPENQT_CFLAGS = 
OPENQT_LIBS = 
PACKAGE = transcode
QT_CFLAGS = -I/usr/include/quicktime -I/usr/local/include/quicktime
QT_LIBS = -L/usr/lib -lquicktime -lpng -lz -lpthread -lglib -ldl -lm -ldv
RANLIB = ranlib
SDL_CFLAGS = -I/usr/include/SDL -D_REENTRANT
SDL_CONFIG = /usr/bin/sdl-config
SDL_LIBS = -lSDL -lpthread
STATBUFFER = 
STRIP = strip
SUPPORTINCL = 
SUPPORTLIB = 
SUPPORTOBJECTS = 
USE_LIBA52_DECODER = 
VERSION = 0.6.2
VORBIS_CFLAGS = -I/usr/include -I/usr/local/include
VORBIS_LIBS = -L/usr/lib -lvorbis -lm
X_CFLAGS = -I/usr/X11R6/include
X_EXTRA_LIBS = 
X_LIBS = -L/usr/X11R6/lib
X_PRE_LIBS = -lSM -lICE
am__include = include
am__quote = 
install_sh = /home/inger/RPM/BUILD/transcode-0.6.2/autotools/install-sh
x_includes = /usr/X11R6/include
x_libraries = /usr/X11R6/lib
AUTOMAKE_OPTIONS = 1.3 foreign

EXTRA_DIST = $(docs_DATA)

SUBDIRS = .

docsdir = $(datadir)/doc/transcode/html

docs_DATA = *.html *.txt *.png *.php
subdir = docs/html
mkinstalldirs = $(SHELL) $(top_srcdir)/autotools/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DATA = $(docs_DATA)


RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
	uninstall-info-recursive all-recursive install-data-recursive \
	install-exec-recursive installdirs-recursive install-recursive \
	uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = Makefile.am Makefile.in
DIST_SUBDIRS = $(SUBDIRS)
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  docs/html/Makefile
Makefile: # $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
docsDATA_INSTALL = $(INSTALL_DATA)
install-docsDATA: $(docs_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(docsdir)
	@list='$(docs_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f"; \
	  $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f; \
	done

uninstall-docsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(docs_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(docsdir)/$$f"; \
	  rm -f $(DESTDIR)$(docsdir)/$$f; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs) $(DESTDIR)$(docsdir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am: install-docsDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

uninstall-am: uninstall-docsDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
	clean-generic clean-libtool clean-recursive distclean \
	distclean-generic distclean-libtool distclean-recursive \
	distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
	info-recursive install install-am install-data install-data-am \
	install-data-recursive install-docsDATA install-exec \
	install-exec-am install-exec-recursive install-info \
	install-info-am install-info-recursive install-man \
	install-recursive install-strip installcheck installcheck-am \
	installdirs installdirs-am installdirs-recursive \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive tags tags-recursive \
	uninstall uninstall-am uninstall-docsDATA uninstall-info-am \
	uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
